34
4. Stop: stop condition of the print
−
Manual: with the
key
−
Trigger: with a channel, with a combination of analog and logic channels (see chapter 5)
−
Stand-by: after a delay or at a precise date and time
−
Paper length: after printing a programmed length of paper
5. After acquisition: action after the end of the print; only possible if the start and stop triggers are not Manual
−
Stop: no action
−
Relaunch: waiting for the trigger Start
−
Save to file: saving or not of the data acquisition into a file
6. Save: simultaneous record of the measurements into a file
−
Simultaneous save: saving or not the simultaneous save
−
File: record to a file o Name of the file: directory and name of the saving file o Acquisition period: sampling rate
of the channels o Length of the max file.
See chapter
File mode
to know the restrictions of the recording on file.
If an initial scroll speed has been programmed, the paper will scroll at that speed while waiting for a trigger.
The operator can force a trigger any time by pressing
when waiting a start trigger.
When printing, pressing
will stop the printer.
6.2 Configuration of print
In the “Direct Mode” configuration screen, press
to open the “Plotting Setup” screen. See
Figure 6.2
Print Setup
Definition of the specific characteristics of the paper printing:
