65
Figure 12.2
1. Channel: selection of the channel, on which the trigger threshold is applied
2. Threshold 1 / Threshold 2: selection of the threshold to settle; each channel is tested with reference with 2 thresholds,
i.e. you can program a start condition on the channel A1 and the threshold 1, and a stop condition on this same
channel A1 and the threshold 2.
3. Higher / Lower: trigger when the channel value is more or less than the set threshold.
4. Threshold value: threshold value selected in real value (taking the current unit and scale of the configuration of the
selected channel into account)
5. Edge: Selection of the active edge of the channel in reference to the threshold.
12.1.2 Multiple thresholds
After selection of a trigger on a set of logic channels, the window allows you to set the trigger under several conditions.
Then, by pressing the various thresholds in front of their respective channels, you open the
Figure 12.3
