48
Figure 10.2
•
Selection of the type of analysis and of the desired values
You can also access other menus:
•
Visualization (Oscilloscope, Digital, Harmonics):
key.
•
Acquisition:
key.
Attention:
The connections of the inputs on the installation to test shall be made by a duly authorized personal.
In network analysis the DAS60 should be strictly connected to its external power supply and connected to the
socket : this for security reasons ensuring earthing.
10.2 Network setup
In the main menu, change of mode by pressing
. You directly access the setup page.
Select the basis configuration of the network:
•
single-phase
•
three-phase mode Aaron: Only 2U and 2I are used. The 3
rd
phase is re-calculated (method of the double-wattmeters).
•
three-phase mode Star/ Delta
The
key allows you to set up the channels in a basis configuration:
