55
•
Validity:
: allows you or not to display a parameter as a graph; the parameters will always be recorded; only the
graphic display is changed.
•
Color: color of the displayed parameter in the graph; for the additional channels and the logic channels, the colors
are as set up for each of them
•
Caliber: the caliber is defined by the nominal values of the voltages and currents. For example, for a nominal voltage
of 230V, the caliber shall be 400V centered on 200V (hence, between 0 and 400V); the minimum and maximum
values may be changed for finer display. For example, you will be able to display the signal U1 between 220V and
240V.
10.13 Record
You launch the data acquisition by pressing
. There is no trigger: the record is made in real time, directly on the
disk.
During the data acquisition, you cannot change the parameters of data acquisition, but you can change the display
parameters (zoom, color, display validity...).
You can also display signals in scope mode or display the parameters in digital mode.
To stop the data acquisition, press
.
