53
9.2 Reassembly
A / 07.11.2019 - OM.SCT.BN.S03EN
26/36
False
Holding band
(406, 407)
too loose, can slip off.
Incorrect
The holding band
(406, 407)
is too tight, universal
joint sleeve will be damaged/sheared off.
Cant up the holding band
(406, 407)
.
Swivel mounting tool
(W3)
approx. 60°
upwards.
Loosen crank
(KUL)
by a half turn.
Swivel cutting lever
(SH)
forward until the pres-
sure piece is lying behind the holding band loop
(SCL)
.
Shear off holding band (406, 407) for material
design stainless steel, corrosion-resistant steel
Universal joint sleeve can be damaged by
hammering and striking. Joint grease
(GF)
can leak
out. Avoid hammering or striking the universal joint
sleeve.
Refer to the technical data (
chapter 3) for the
material design.
Shear off holding band
(406, 407)
below holding
band loop
(SCL)
.
–
Strike cutting lever
(SH)
with the palm of your
hand.
Straighten the holding band
(406, 407)
carefully
if it lifts up at the sheared-off end.
