45
9.2 Reassembly
A / 07.11.2019 - OM.SCT.BN.S03EN
18/36
9.2.3 Assemble pump
9.2.3.1 Assemble lantern (200) and drive (ANT)
Check the holding band
(406, 407)
–
Bent-over holding band
(406, 407)
is in
contact with holding band loop
(SCL)
to
avoid damaging universal joint sleeve
(405)
.
–
Press on holding band
(406, 407)
using tool
(WFZ)
if necessary.
Risk of injury due to lack of stability of
the pump. Crushing of body parts due to the pump or
pump parts tipping or falling down.
Fasten base plate
(GPU)
to secure pump.
–
Recommendation: Fasten to suitable base
using a screw fitting
(SCH)
.
Assemble lantern
(200)
with screw fitting
(SCH)
on base plate
(GPU)
.
Clean flange bearing surfaces
(FLS)
, centering
surface
(ZD)
and output shaft of the drive
(ANT)
.
Assemble drive
(ANT)
with screw fitting
(210,
212, 213)
on lantern
(200)
.
