48
9.2 Reassembly
A / 07.11.2019 - OM.SCT.BN.S03EN
21/36
Tighten holding band
(406, 407)
- rotor-side
–
Insert holding band
(406, 407)
into
tool
(W3)
.
–
Clamp holding band firmly using eccentric
lever
(EX)
.
–
Turn crank
(KUL)
until the holding band
(406, 407)
is tensioned and is in contact with
holding band loop
(SCL)
.
–
Carefully pull the holding band
(406, 407)
together until it is in contact with the
universal joint sleeve around the circumfer-
ence.
Correct
The holding band
(406, 407)
has drawn in the out
shape of the universal joint sleeve and is firmly
seated.
False
Holding band
(406, 407)
too loose, can slip off.
Incorrect
The holding band
(406, 407)
is too tight, universal
joint sleeve will be damaged/sheared off.
Cant up the holding band
(406, 407)
.
Swivel mounting tool
(W3)
approx. 60°
upwards.
Loosen crank
(KUL)
by a half turn.
Swivel cutting lever
(SH)
forward until the pres-
sure piece is lying behind the holding band loop
(SCL)
.
