Manual ISDN Adapter- Startup/Software Installation for Windows NT 4.0 79
●
Enter your call number. If it is applied for the service feature, a „sub address“ can be entered
in this box. Should you wish your call number not to be shown to the opposite terminal activate
„
Do not show to opposite terminal
“.
With the button <
Add
> you can enter more call numbers and sub addresses.
With the button <
Process
> you can change the call numbers for incoming calls when they are
marked with the mouse.
With the button <
Cancel
> you can cancel marked call numbers.
●
Confirm
with
<
OK
>.
●
Click
<
Close
> to leave the register „
Adapter
“.
●
Confirm the prompt for restarting the computer by clicking <
Yes
>.
9.4.4 Driver
update
You can update the driver software of your ISDN adapter as follows:
●
Start the dialog box „
Network
“ by clicking with the right mouse button „
Network environment
“
of your Windows desktop and selecting <
Properties
> in the following menu. When you click
„
Adapter
“ all adapters installed appear.
●
Select
„
CAPI 2.0 RAS driver
“ and confirm with „
Update
“.
●
In the dialog box „
Windows NT-Setup
“ please enter the drive and the path of the file
OEMSETUP.INF
Example for installation from CD-ROM drive E
E:\capiras\WINNT\eng
Figure 9.4.4.1
●
Confirm
with
<
Next
> to proceed with installation.
Note
:
Close the „
Network
“-applet of Windows NT 4.0 and confirm the request for restart with <
YES
> so that your
ISDN adapter is ready for use.
After restart of Windows NT 4.0 the ISDN adapter with the actual driver is ready for use!
