Manual ISDN Adapter - Startup /Software Installation for Windows ME 39
7 Software-Installation for Windows ME
7.1 Installing the CAPI driver
After you have installed your ISDN adapter as described in Section 4.2.1, 4.2.2, 4.2.3 and 4.2.4 you can
begin with the software installation for Windows ME.
These speed USB ISDN adapters like speed win PCI, speed star and speed USB are p
lug & play
adapters, i.
e. Windows ME automatically identifies the adapter as a new hardware component. If you use „speed star“,
please note that the adapter must be plugged in!
Windows ME interactively guides you through the installation. Have ready your Windows ME CD, you will
possibly need it.
Now, follow the instructions as described in chapter 7.1.2.
Caution:
For installation of speed card follow the instructions of chapter 7.1.1.
7.1.1 Installation of non plug & play ISDN adapters
•
Insert the Sedlbauer CD into the right drive.
•
Click “
Language
” and <
Next
>
•
In the next dialog box mark “
Capi driver
” and confirm with <
Install
>
•
Now the hardware assistant will be started.
•
Click “
No, I want to select the hardware from a list
”.
•
Click “
Next
”
•
Click “
Other devices
” and confirm with “
Next
”
•
Select “
Have disk
”
•
Now, insert the following path for installation
•
Example for installation from CD-ROM-Drive D:
D:
•
Confirm with <
OK
>
•
Mark “
ISDN-adapter ISA
” and click <
Next
>
•
Note the interrupt as well as the I/O address suggested.
•
Click <
Next
>.
•
Confirm the request to shut down your computer with <
YES
> and install the adapter as described in
chapter 4.2.2 and 4.3.
•
Here you can select the language you wish to guide you through installation.
Sedlbauer AG configuration will be started with the dialog box below.