SEDLBAUER speed card Page 66 Manual Download

Page: 66 / 97

66 Manual ISDN Adapter- Startup/Software Installation for Windows NT 4.0

Figure 9.4.1.4

Caution:

Please check whether the interrupt as well as the I/O address displayed on your computer are assigned. If
so, please try other unassigned values. Under “

Start/Programs/Windows NT diagnosics

”, (register card

“

Resources

”) the values can be displayed.

•

Confirm

with

•

Click

Yes

> to restart your computer now.

After restart of Windows NT 4.0 the ISDN adapter is ready for operation.

Caution:

Check whether the PCMCIA drive and the ISDN adapter have the same IRQ and I/O-address. Select
“

Start/Settings/System Control

” and click the icon “

PC-card (PCMCIA)

” then. Now mark your ISDN

adapter and click <

Properties

>. When you click “

Resources

” you will see the IRQ and the I/O-address.

These settings

must

conform to those of the installed ISDN adapter.

Summary of Contents for speed card


































































































Search results

Summary of Contents for speed card

Reviews:

Related manuals for speed card

Brands by name

Popular brands

SEDLBAUER speed card, Manual

Search results

Summary of Contents for speed card

Reviews:

Related manuals for speed card

Brands by name

Popular brands