Manual ISDN Adapter- Startup/Software Installation for Windows NT 4.0 67
9.4.2 Installing the Capi 2.0 RAS driver
Note
Should you have installed no network board or the Windows NT 4.0 network support please start installation
as described in chapter 9.4.2.1. Otherwise please start as described from chapter 9.4.2.2.
9.4.2.1 Simultaneous installation of the Sedlbauer Capi 2.0 RAS driver and the Windows NT
network support
•
Click with the right-hand mouse button
„Network Neighbourhood
“ on your desktop, select n the
following context menu „
Properties
“ to open the „
Network
“ applet.
•
The following window appears:
Figure 9.4.2.1.1
•
Click
<
Yes
> to install the Windows NT network support.
•
In the following window select „
Connect to network directly
“
Figure 9.4.2.1.2
•
Click
<
Select from list
>
•
Insert the installation CD-ROM in the corresponding driver
•
Click
<
Have Disk
> now.
•
Now you will be asked to enter the path of the drivers on the installation CD-ROM.
Example of installation from CD-ROM drive E:
E:\CAPIRAS\WINNT\ENG
Figure 9.4.2.1.3
