Manual ISDN Adapter - Startup /Software Installation for Windows ME 43
7.1.3 Configuration of the ISDN adapter
Caution:
The IRQ and the I/O address of speed card can be changed in the device manager (Start/Settings/System
Control, double click on the icon “System”, register card “device manager”).
•
Double click on
“Sedlbauer ISDN adapter
”
•
Mark “ISDN adapter ISA and select the button <
Properties
>.
•
The settings for IRQ and the I/O-address can be changed here.
•
Don´t forget to take over the settings on speed card (see chapter 4.2.2)
Note:
If your ISDN adapter is already installed you can configure the adapter subsequently by selecting
„
Start/Programs/SedlbauerISDN/Configuration
“ on your Windows-desktop.
General settings:
D-channel-protocol
: This field is to
fix the signalling protocol: (DSS1)
Test mode: This field is to select test
mode when starting driver.
Standard: adapter
Figure 7.1.3.1
