10 Manual ISDN Adapter- Startup/Hardware Installation
IRQ4
IRQ5 (Default-Setting
)
IRQ7
IRQ10
IRQ11
IRQ12
IRQ15
IRQ3
RJ-45-Slot
Jumper to set the
Hardware-Interrupts
Setting the I/O address
The I/O address is set by the DIP switch in the middle of the card.
Note:
I/O address on default:
270h
RJ-45-Slot
1
2 3
4 5 6 7
8
ON
DIP-Switch (S1-S8)
to set the I/O address-
ON-Position
OFF-Position
Note:
•
The card address must not be used by any other peripheral of the PC!
•
When changing configuration in future please change configuration of the CAPI driver
(CAPI setup) accordingly.
