Manual ISDN Adapter - Startup /Technical Requirements / Hardware Installation 11
DIP standard settings
Port
Address
DIP-Switch
S8
S7
S6
S5
S4
S3
S2
S1
COM1
3F8h
OFF OFF OFF OFF OFF OFF OFF OFF
COM2
2F8h
OFF OFF ON OFF OFF
OFF OFF OFF
COM3
3E8h
OFF OFF OFF OFF OFF OFF ON OFF
COM4
2E8h
OFF OFF ON OFF OFF OFF ON OFF
LPT1
378h
OFF OFF OFF
ON OFF OFF OFF OFF
LPT2
278h
OFF OFF ON ON OFF OFF OFF OFF
220h
OFF OFF
ON ON ON OFF ON ON
These addresses
270h
OFF OFF
ON ON OFF OFF OFF ON
can be used
280h
OFF OFF ON OFF ON ON ON ON
for expansion!
300h
OFF OFF OFF ON ON ON ON ON
310h
OFF OFF OFF ON ON ON OFF ON
330h
OFF OFF OFF ON ON OFF OFF ON
Note
:
•
The column “
Port
” shows which I/O address is normally used by the relating interface.
•
If your PC does not have these interfaces these addresses can be used for expansion.
After checking the settings of speed card open your PC as described in your manual. Then insert the ISDN
adapter in a free ISA-bus slot. Should you have any problems or questions please contact your supplier.
speed card
P C I - S l o t
I S A - S l o t s
Figure 4.2.2
