Video Setting
In the
Record Setting
highlight and press the
OK
button on
Video Setting
as shown below.
Press the
UP
and
DOWN
button to make a selection between
VGA
(640x480 display resolution,
default),
QVGA
(display with 320×240 display resolution) and
ZOOM
(camera(s) image will be
zoomed in). Press
OK
to save the setting and exit Video Setting or press the
MENU
button to exit
without saving.
Note: VGA resolution recording and live view frame rat is fixed at 11 frame per second.
QVGA/ZOOM resolution recording and live view frame rate is fixed at 30 frame per second.
Motion Record Time
In the
Record Setting
highlight and press the
OK
button on
Motion Record Time
or motion
detection record time as shown below.
Motion Record Time
is the time set for the motion detection recording session; it ranges from
10 Sec (default), 30 Sec and 2 Min. Press
UP
or
DOWN
to make a selection. Press
OK
to save
the setting and exit
Motion Record Time
or press the
MENU
button to exit without saving.
Recording session refers to the length of the recording triggered by motion detection. Once trigg-
er, a new file will automatically be generated and end when the
Motion Record Time
set expires.
If within the event trigger and then re-triggered, the file will accumulate as one single file, the
accumulation can be up to 10 minutes long or about 89MB file size.
Motion recording active in QUAD channel display view:
Any channel(s) that detects motion will automatically become full screen and the recorder will
start to record the video or photo for the time frame setup in the menu setting. After motion
recording interval ended, the screen will automatically go back to QUAD display view. Please be
noted that under QUAD screen display view, only motion detection is operable, Manual recording
and Schedule recording will NOT be operable. Change the live display view to single full screen
for Manual recording and Schedule recording to function properly.
17
Video Setting
Motion Record Time
Summary of Contents for DigiAir-SD
Page 26: ......
