SecurityMan DigiAir-SD, User Manual

Page: 16 / 26

SD Card icon
Once the SD card (storage media) is inserted into the SD slot , the SD icon and Free Space
(in MB) will appear on the screen as shown in the above illustration. Both the SD icon and
Record symbol will flash on the screen to indicate that the storage media is full. The screen will
not display the SD icon or Free Space , if the SD card is not inserted correctly or cannot be
identified by the recorder (support up to 32GB of memory).
Overwrite
When Overwrite feature option can be setup in the setup menu, if set to on, an OW icon will
appear at the bottom right side of the screen to represent that overwrite is on. In normal state the
icon will not appear on screen or if Overwrite option is set to off in the setup menu.
Volume
Volume by default will not appear in the user’s interface screen until the UP, RIGHT, and LEFT,
DOWN buttons is pressed. Once the UP, RIGHT, LEFT, DOWN buttons is pressed the volume icon
will appear on screen as Rx and Tx with volume levels right above the Date/Time on top of day.
Talk
Talk by default will not appear in the user’s interface screen until the TALK button is pressed. Once
the TALK button is pressed the Talk will appear on screen right below the Motion Detection icon.
The word “Talk” will appear on the screen whenever the TALK button is pressed, indicating that the
intercom function is active.
Menu Setup
Menu Setup:
Press the MENU button to enter the Menu Setup window as shown below. Then press the UP,
DOWN, LEFT, RIGHT buttons to browse through the setup menu. The selected icon will turn dark
blue and a descriptive text to the corresponding function will appear on the top of the screen. Press
the OK button at anytime to select and enter the sub-menu category. Press the MENU button once
to exit the sub-menu and twice to exit out from the Menu Setup.
13
Camera Pairing