JPEG2000 Stand alone DVR User Guide
-
86
-
Limited Product Warranty
Security Labs, Inc. warrants that if a Security Labs product proves to
be defective in material or workmanship under normal usage, Security
Labs will provide without charge to the consumer, parts and/or labor necessary to remedy the defect for the
period of TWO YEARS from the date of purchase (ONE YEAR on Hard Disk Drives). The warranty period
commences on the date that the product is purchased by the consumer. Any implied warranty is also limited to
the duration above.
THIS WARRANTY DOES NOT COVER THE FOLLOWING: FLUCTUATIONS IN THE POWER SOURCE OR
LIGHTNING-RELATED DAMAGE; ATTACHED OR UNATTACHED ACCESSORIES; COSMETIC PARTS SUCH AS
KNOBS AND ACCESS DOORS; CABINET DAMAGE, INCLUDING DAMAGE IN TRANSIT; ACCIDENTAL DAMAGE;
MISUSE; ABUSE; UNAUTHORIZED PARTS USAGE OR REPAIRS; RECEPTION PROBLEMS DUE TO INADEQUATE
SIGNAL; UNAUTHORIZED INTERNAL CONTROL OF ADJUSTMENTS; INSTALLATION; ADJUSTMENT OF
CONSUMER CONTROLS; OR ANY OTHER USE OF THE PRODUCT OTHER THAN THAT SPECIFICALLY
PRESCRIBED IN THE OWNER'S MANUAL. THIS WARRANTY APPLIES TO PRODUCT SOLD AS NEW AND NOT
REMANUFACTURED, RECERTIFIED, OR B STOCK PRODUCTS.
SECURITY LABS, INC. DOES NOT ASSUME LIABILITY FOR ANY VIOLATION OF PRIVACY FROM ILLEGAL
RECORDINGS MADE ON THIS UNIT. THE USER/OWNER ASSUMES FULL LIABILITY FOR ANY AND ALL
RECORDINGS MADE FROM THIS UNIT IN A SECURITY OR SURVEILLANCE OPERATION OR IN ANY OTHER USE.
SECURITY LABS IS NOT RESPONSIBLE FOR RECORDINGS THAT VIOLATE LAWS OR THAT MAY PROVE
OFFENSIVE OR TEND TO INCRIMINATE ANOTHER INDIVIDUAL. LOCAL, STATE, AND FEDERAL LAWS MUST BE
OBSERVED REGARDING ALL RECORDINGS.
To obtain warranty service, the consumer must provide the product along with evidence that will positively
identify the date that the product was purchased from Security Labs or an authorized Security Labs product
representative, dealer, retailer, or distributor. Prior to shipment, a RETURN AUTHORIZATION must be obtained
from SECURITY LABS; this will assist us in more efficient service on your unit, and possibly avoid shipment if the
adjustment can be made over the phone. If shipment is made, the cost for postage, insurance and shipping of the
product is the responsibility of the owner.
SECURITY LABS' OBLIGATION UNDER THIS WARRANTY SHALL BE TO REPLACE SUCH PARTS AND PROVIDE
LABOR AS STATED. SECURITY LABS WILL NOT BE LIABLE FOR ANY LOSSES OR INCONVENIENCES DIRECT OR
INDIRECT, OR CONSEQUENTIAL PROPERTY DAMAGES.
To obtain a warranty return authorization number, contact Security Labs’ Customer Service at:
SECURITY LABS, INC.
15540 HERRIMAN BLVD.
NOBLESVILLE, IN 46060
CUSTOMER SERVICE: 1-800-774-0284
ONLINE: www.security-labs.com
