Security Labs SLD284 Owner'S Manual Download Page 29

Page: 29 / 86

JPEG2000 Stand alone DVR User Guide

3-10-7 Playback speed adjustments



While playback, using the direction keys to adjust the playback speed.



Speed up the playback



Slow down the playback



Rewind



Play in forward direction

The range of speed adjustment: 1/16X~1X, 1X~64X



Press “ J.SHUTTLE” key to pause the playback. Press “J.SHUTTLE ”again to
continue the playback.

3-10-8 Adjust Playback speed by JOG-SHUTTLE



During playback, press “J.SHUTTLE ”key to adjust the playback speed.

1. [High speed playback/Low speed playback/Forward Playback/Rewind Playback]



Using the outer circle of Jog-shuttle to adjust the fast playback speed. Turn clockwise for forward direction, and
turn counter-clockwise for Rewinding.

2. [Playback step by step]



Using by inner circle of Jog-shuttle. Turn clockwise for forward direction and turn counter-clockwise for
backward direction.

3-10-9 Adjust Playback speed by IR remote controller

While playback, select the direction keys of remote control to adjust the speed.



X times high-speed playback.



X times low speed playback.



Rewind.



Play in the forward direction.

Adjust the speed by REW key (High-speed backward playback) or FF key (High-speed
forward Playback). Press the keys repeatedly to adjust the rate.

Adjust the speed by SLOW-Motion keys (Slow playback in backward or in forward).

Press the keys repeatedly to adjust the rate.

Playback frame by frame using the STEP keys (Step playback in reverse or forward).

Summary of Contents for SLD284























































































Search results

Summary of Contents for SLD284

Reviews:

Related manuals for SLD284

Brands by name

Popular brands

Security Labs SLD284, Owner'S Manual

Search results

Summary of Contents for SLD284

Reviews:

Related manuals for SLD284

Brands by name

Popular brands