Security Labs SLD284, Owner'S Manual

Page: 49 / 86

JPEG2000 Stand alone DVR User Guide
- 49 -
4-6-6 Audio volume setup
1.[INPUT VOLUME]

Adjust the VOLUME of Recorded AUDIO
2.[LIVE VOLUME1~4]

Adjust the VOLUME of LIVE per channel.
3.[PLAY VOLUME1~4]

Adjust the VOLUME of PLAY per channel.
4-6-7 Remote controller setup
1.[REMOTE CONTROLLER SETUP]

Select the type of remote to use:
TYPE.N TYPE, S TYPE, U TYPE 1 ~ U TYPE 6: Total 8 TYPE
Selectable. (The remote supplied is an N type).
4-7 Factory default
Press

to select and ENTER to turn ON and OFF the selection. Move the cursor
to RUN and press ENTER to execute the Factory Default command.
1.[ALL]

Set all the settings back to factory default.
2.[SCREEN DISPLAY]

Set ”SCREEN DISPLAY” back to factory default.
3.[CAMERA COOLR SETUP]

Set ”CAMERA COLOR SETUP” back to factory default.
4.[MOTION SETUP]

Set ”MOTION SETUP” back to factory default.
5.[PANTILT SETUP]

Set ”PANTILT SETUP” back to factory default.
6.[SCHEDULE SETUP]

Set ”SCHEDULE SETUP” back to factory default.
7.[CONFIGUATION]

Set ”CONFIGURATION” back to factory default.
4-8 Language

Press [+] / [-] button to select a language.
1. The DVR cannot reset the
password to default by
running Factory Default.
2. It is strongly suggested to
run Factory Default and HDD
CLEAR when you install a
new hard drive(s).