Security Labs SLD284, Owner'S Manual

Page: 58 / 86

JPEG2000 Stand alone DVR User Guide
- 58 -
6-6 H.264 LAN/WAN Video Transmission
1.
[IP / PORT / ID / PW]

IP: Enter the IP address of DVR
PORT: Enter the PORT of DVR
ID: Enter ID (default: ADMIN)
PW: Enter the password
2. [CONNECT / DISCONNECT /
SETUP]

CONNECT- Connect to DVR
DISCONNECT- Stop the connection with
DVR.

SETUP- To enter the setup.
3. [Status Window]

Shows the current connection status.
4. [PTZ CONTROL]

User can control PTZ camera connected to DVR remotely. ( To control PTZ remotely, user must set PTZ setting
in DVR in advance.)
5. [Bit Rate / AUDIO]

Bit rate –shows received data from network. Please refer to “set up” in Network Connection.
Does not support audio currently.
6. [DVR Virtual Key ]

These keys operate the same way as the front panel DVR buttons
[NVS SETUP]
1. [Bitrate]
DATA SIZE from NVS. The larger the number, the smoother
the image will be.
(Set Value : 100Kb ~ 2500Kb, can be adjusted by 50K)
2. [GOP]
Image (I frame, P frame) from NVS. The larger the
number, the better the quality.
3. [Frame Rate]

DATA RATE from NVS. The larger the number, the
smoother the movement will be.
4. [Resolution]

DATA RESOLUTION from NVS. Values: 160*120, 320*240, 640*480.

In order to work NVS properly, the value should be adjusted according to the Network Condition.* Please refer
to ‘bitrate’ displayed in TRANSMITTER when user set.