JPEG2000 Stand alone DVR User Guide
-
44
-
4-5-2 USB BACKUP
Back-Up procedure is the same as CDR Back-Up.
[System Status Messages]
If MEMORY STICK is not inserted :
- USB STORAGE IS CHECKING
- USB STORAGE IS NOT AVAILABLE
- RE-CONNECT THE USB STORAGE
- CONNECT OTHER USB STORAGE
When MEMORY STICK or USB HDD is recognized
- USB STORAGE IS CHECKING
- THERE IS FREE SPACE ON STORAGE
- USB STORAGE IS AVAILABLE
During Back-Up
- CHANGE WRITE PROTECT MODE
- START WRITING IN USB STORAGE
- FINISH WRITING IN USB STORAGE
Error Message
- THERE IS A PROBLEM ON USB PORT (If USB PORT fails to work properly)
- USB STORAGE IS FULL (When USB is full)
- FILE SYSTEM IS NOT SUPPORTED (If File System is not supported)
- SIZE IS LARGER THAN FREE SIZE (If back-up size is larger than free space)
4-6 External device
4-6-1 TCP/IP setup
[IP CONFIG SETUP]
1.[MAC ADDRESS]
Indicate the DVR’s MAC address. MAC address is not editable.
2.[IP ADDRESS]
Set up the DVR’s IP address.
1. User can back up the recorded video to USB Media using USB (HOST) port on front panel of DVR.
Refer to [START] and [END] of data on HDD and set start and end time of data to USB Media ( Memory
Stick or USB HDD ). Select backup file size, and move to BACKUP and press [ENTER] Button to start
copy.
1.Please make a HDD partition by PC before using USB HDD back-up. The partition must be within
31GB and the file system format must be FAT32.
2.If Back-Up size is larger than 2GB, it will create several files.
3.Press 1~4 to change to a different partition.