Security Camera King DVR-CVIC32960C-DH User Manual Download Page 49

Page: 49 / 257

DCVI Standalone DVR User’s Manual

Item

Note

the video brightness if the value is high. But the video

noise may become too clear.

Color mode

It includes several modes such as standard, color, bright,

gentle. Select a color mode, the sharpness, brightness,

contrast

and

etc

can

automatically

switch

corresponding setup.

Click reset button, device can automatically adjust to the

best display effect.

Note:

This function is for analog channel only.

Position

It is to adjust the image position on the screen. The

digital stands for the pixel. The default pixel is 16.

Note:

This function is for analog channel only.

4.4.6 Search

Please refer to chapter 4.8.1 for detailed information.

4.4.7 Manual Record

Please refer to chapter 4.10.4.3.1 for detailed information.

4.4.8 Alarm Output

Please refer to chapter 4.10.3.4 for detailed information.

4.4.9 Remote Device

Please note it is for digital channel only.

Please refer to chapter 4.10.1.1 for detailed information.

4.4.10 Video Matrix

Please refer to chapter 4.10.5.3 for detailed information.

4.4.11 Main menu

Please refer to chapter 4.7 for detailed information.

4.5

Navigation Bar

You need to go to the Main menu->Setting->System->General to enable navigation

bar function; otherwise you can not see the following interface.

The navigation bar is shown as below. See Figure 4-25.

Summary of Contents for DVR-CVIC32960C-DH


































































































































































































































































Search results

Summary of Contents for DVR-CVIC32960C-DH

Reviews:

Related manuals for DVR-CVIC32960C-DH

Brands by name

Popular brands

Security Camera King DVR-CVIC32960C-DH, User Manual

Search results

Summary of Contents for DVR-CVIC32960C-DH

Reviews:

Related manuals for DVR-CVIC32960C-DH

Brands by name

Popular brands