Direct Programming Manual
Edge
Smart Keypads and Card Readers
70
If you need help, please email
or call
(972) 474-6390
.
Enter 3 to enable as remote and listen for good tone.
Enter # key to exit Programming Mode.
Configure Wiegand Bit Format
These procedures will configure the Wiegand bit format for Wiegand codes.
IMPORTANT! COMPLETING THESE PROCEDURES WILL DELETE ALL WIEGAND CODES!
Note: The SBI Flex 64-bit format is only available for inputs configured as Wiegand keypads.
Both Wiegand Inputs
1251
$
6
$
501
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter secondary sub mode 501 and listen for good tone.
Enter 1 (for 26-bit format) or 2 (for SBI Flex 64-bit format) and listen for good tone.
Enter # to exit Programming Mode.
Wiegand Input 1
1251
$
6
$
502
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter secondary sub mode 502 and listen for good tone.
Enter 1 (for 26-bit format) or 2 (for SBI Flex 64-bit format) and listen for good tone.
Enter # to exit Programming Mode.
Wiegand Input 2
1251
$
6
$
503
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter secondary sub mode 503 and listen for good tone.
Enter 1 (for 26-bit format) or 2 (for SBI Flex 64-bit format) and listen for good tone.
Enter # to exit Programming Mode.
Note: These procedures will not work if any of the following are true:
Wiegand input is disabled.
Split relay feature is enabled.
