Direct Programming Manual
Edge
Smart Keypads and Card Readers
68
If you need help, please email
or call
(972) 474-6390
.
followed by a device on Wiegand Input 1 or 2.
1251
$
6
$
310
$
3
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 310 and listen for good tone.
Enter next sub mode 3 and listen for good tone.
Enter # key to exit Programming Mode.
Enable Scheme B (W1
$
W2):
This procedure will enable Scheme B, in which access must first be granted by a device on
Wiegand Input 1 followed by a device on Wiegand Input 2.
1251
$
6
$
310
$
4
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 310 and listen for good tone.
Enter next sub mode 4 and listen for good tone.
Enter # key to exit Programming Mode.
Enable Scheme C (K
$
W1):
This procedure will enable Scheme C, in which access must first be granted by the Edge unit
followed by a device on Wiegand Input 1.
1251
$
6
$
310
$
5
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 310 and listen for good tone.
Enter next sub mode 5 and listen for good tone.
Enter # key to exit Programming Mode.
Check Current Anti-Passback Configuration:
This procedure will give the current anti-passback configuration status.
1251
$
6
$
310
$
9
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 310 and listen for good tone.
