Direct Programming Manual
Edge
Smart Keypads and Card Readers
54
If you need help, please email
or call
(972) 474-6390
.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 1. No tone will sound.
Enter next sub mode 107 and listen for good tone.
Enter next sub mode 1.
Enter code (26-bit: 5 digits; numbers only; max value 65535) and listen for good tone.
Repeat above step to add additional codes.
Enter # key to exit Programming Mode.
Quick Entry for Wiegand Card Readers, Remotes, and Vehicle Tag Readers
This procedure will add one or more access codes with a specified facility code for a Wiegand
card reader, remote, or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
1
$
107
$
2
$
XXX
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 1. No tone will sound.
Enter next sub mode 107 and listen for good tone.
Enter next sub mode 2 and listen for good tone.
Enter 3-digit facility code and listen for good tone.
Enter 5-digit access code and listen for good tone.
Repeat above step to add additional codes.
Enter # key to exit Programming Mode.
Note: This procedure will not work if Wiegand input is set to SBI Flex 64-bit format.
Bulk Entry for Wiegand Card Readers, Remotes, and Vehicle Tag Readers
This procedure will add access codes with a specified facility code in bulk for a Wiegand card
reader, remote, or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
1
$
107
$
3
$
XXX
$
XXXXX
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 1. No tone will sound.
Enter next sub mode 107 and listen for good tone.
Enter next sub mode 3 and listen for good tone.
Enter 3-digit facility code and listen for good tone.
Enter 5-digit starting access code and listen for good tone.
Enter 5-digit ending access code and listen for good tone (maximum of 100 codes).
