Edge
Smart Keypads and Card Readers
Direct Programming Manual
If you need help, please email
or call
(972) 474-6390
.
19
Wiegand card reader or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
2
$
100
$
4
$
Scan First Card
$
...
$
Scan Last Card
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 2 (for Wiegand Input 2). No tone will sound.
Enter next sub mode 100 and listen for good tone.
Enter next sub mode 4 and listen for good tone.
Scan card to be added twice at reader and listen for good tone.
Repeat above step to add additional codes.
Note: Card-to-card swipe timeout is 10 seconds.
Enter # key to exit Programming Mode.
Note: This procedure will not work if any of the following are true:
Wiegand input is set to SBI Flex 64-bit format.
Wiegand input is disabled.
Wiegand input is configured to share code list with non-Wiegand codes.
Split relay feature is enabled.
Add Manager Access Code(s) to Relay A on Both Wiegand Inputs
These procedures will add a manager access code or codes to Relay A for Wiegand keypads, card
readers, remotes, and vehicle tag readers on both Wiegand inputs.
Note: If the split relay feature is enabled, codes will be added per that configuration.
Quick Entry for Wiegand Keypad (uses default facility code)
This procedure will add one or more manager access codes with the default facility code for a
Wiegand keypad. Both the 26-bit and SBI Flex 64-bit formats can be used.
1251
$
6
$
101
$
1
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 101 and listen for good tone.
Enter next sub mode 1 and listen for good tone.
Enter code (26-bit: 5 digits; numbers only; max value 65535) and listen for good tone.
Repeat above step to add additional codes.
Enter # key to exit Programming Mode.
Note: This procedure will not work if any of the following are true:
