Operation when connected to an EMR system • 93
17
-1
0-
05
-3
53
-0
02
g_
10
-2
02
0
B
To perform a measurement with an interrupted connection to an EMR
system, proceed as follows:
1. Log yourself in:
a) Scan EMR user ID
b) Confirm status message
The
User ID not verfied
message appears.
2. Call up a patient file:
a) Scan patient ID
b) Confirm status message
The patient ID is displayed:
3. Perform the measurement as described in the following sections:
► ➔
► ➔
► ➔
Stopping a measurement procedure
The measurement is saved in the
Unsubmitted measurements
list.
4. Log in again when the connection to the EMR system is active again.
5. Proceed as described in this section:
