Seca mBCA 525 Instructions For Use Manual Download Page 33

Page: 33 / 194

Starting up the device • 33

English

-1

-3

-0

-2

5.2 Setting up device

NOTE

This section shows how to assemble all of the measuring accessories

available for this device. The actual scope of delivery of your device

may be less than this.

NOTICE!

Damage to device, malfunction

Excessive use of force may damage tubes and cables.

►

In order to connect measuring accessories to the device or remove

them from it, take hold of tubes only by the tube coupling.

►

In order to connect measuring accessories to the device or remove

them from it, take hold of cables only by the connectors.

►

Use only measuring accessories which have no externally visible

damage.

Connecting the SmartBucket

NOTICE!

Malfunction

The SmartBucket needs one of the USB interfaces for communication

and power supply. If the USB connection is removed, no vital signs

can be measured.

►

Always keep the SmartBucket connected to the USB interface.

►

Only connect accessories, for example a USB memory stick, to the

other USB interface.

►

Connect the USB cable of the SmartBucket to a free USB interface of the
monitor.

COVIDIEN

FILAC

3000 temperature probe

Push-button electrodes for affixing to patient (pack of 100)

Measuring mat with rechargeable battery and electrode
cables

No.

Accessory for the version shown

Pcs.

➔

Connecting the SmartBucket

➔

Connecting the blood pressure cuff

➔

Connecting the temperature probe

➔

Connecting the in-ear thermometer

➔

Connecting the seca SpO

sensor

➔

Connecting the Masimo SET

SpO

sensor

➔

Suspending the measuring mat in the magnetic catch

Summary of Contents for mBCA 525



































































































































































































Search results

Summary of Contents for mBCA 525

Reviews:

Brands by name

Popular brands

Seca mBCA 525, Instructions For Use Manual

Search results

Summary of Contents for mBCA 525

Reviews:

Brands by name

Popular brands