Seca mBCA 525 Instructions For Use Manual Download Page 36

Page: 36 / 194

36 •

seca mVSA 535

seca mBCA 525

-0

2. Put the connector for the SpO

sensor/the patient cable in the socket on

the SmartBucket until you feel the connector engage.

NOTE

The holder above the SpO

connection is for storing the SpO

sensor.

Connecting the Masimo SET

SpO

sensor

NOTICE!

Damage to device, malfunction

The SpO

sensor must be compatible with the SpO

measuring

equipment fitted.

►

Ensure that the SpO

sensor is compatible with the SpO

measuring

equipment fitted in your device

➔

Optional accessories and spare

parts

►

Follow the user documentation from the sensor manufacturer.

1. If necessary, connect a patient cable to the SpO

sensor as described in

the user documentation from the sensor manufacturer.

2. Put the connector for the SpO

sensor/the patient cable in the socket on

the SmartBucket until you feel the connector engage.

NOTE

The holder above the SpO

connection is for storing the SpO

sensor.

Click!

Press!

Summary of Contents for mBCA 525



































































































































































































Search results

Summary of Contents for mBCA 525

Reviews:

Brands by name

Popular brands

Seca mBCA 525, Instructions For Use Manual

Search results

Summary of Contents for mBCA 525

Reviews:

Brands by name

Popular brands