SEA SYSTEMS
INSTALLATION AND USE
STK3-GMV10 Control panel and Pre-wiring
For Hydraulic Elevators
MSTK3-GB
Rev.04
05/02/12
© Sea Systems S.r.l.
Page 8 of 81
B.2) Safety Measures
•
The installation of the equipment must be performed by a qualified technician, who
under his/her own responsibility guarantees following the standards for good
workmanship.
•
Before performing any cleaning of maintenance operations, disconnect the
equipment from the electric mains using the general system switch.
•
Always wear the necessary IPD (individual protection devices) (Fig. 2.1),
specifically:
-
- Helmet
- Gloves
-
Coveralls closed at the writs
- Safety
shoes
- Safety
Belt
- Ear
protection
Safety Signs
•
Do not wear loose clothing or objects (necklaces, watches, ties...) and tie back long
hair.
•
Do not keep sharp objects or objects that can puncture (ex. screwdrivers,
scissors...) in shirt pockets.
•
Do not tamper with, spoil, or hide warning signs/labels: If illegible, request their
immediate replacement.
•
To lift heavy loads, use suitable equipment in order to limit spinal injury due to
manual operations.
B.3) Terms Used
NOTE
This symbol indicates relevant or important information for the personnel
involved.
WARNING
This symbol indicates information that if not respected may cause personal injury
or damage the system.
CAUTION
This symbol indicates that the operation described may cause physical injury to
the personnel involved if not performed in compliance with the worker safety
norms.
