18
INSTALLATION OF THE REAR BRACKET TO THE POST
The bracket must be positioned so that the operator is perfectly leveled (Fig. 23)
Adjustable rear bracket (with screws)
on demand
Fig. 23
3.85”
2.28”
2.16”
2.55”
Fig. 22
Fig. 24
Fig. 25
POSITIONING OF THE FRONT FIXATION
Once the operator has been mounted on the back fixation close the leaf and do as follows:
1) Release the operator
(as in Fig. 56 to 61)
2) Pull out completely the chromium plated rod,
afterwards bring it back about 0,40 inches
3) Fix the rod on the front fixation (Fig. 25)
4) Position the operator perfectly horizontal and mark the position of the front fixation (Fig. 24)
Attention:
Avoid the welding of the front fixation to the rod of the hydraulic operator already fixed as the
welding residual (squirt) could ruin the chromium -plating of the rod.
