GATE WARNINGS
The first thing to check is that the gate is in good running order as follows:
A.
The gate is rigid and straight and runs smoothly throughout its travel.
B.
The length of each leaf must comply with max. length indicated on technical specifications of the model
C.
The weight of each leaf must comply with max. weight indicated on technical specifications of the model
D.
The hinges are hardly anchored and are able to support the torque of the operator; they do not have
irregular movements and/or any friction during the whole movement of the leaf.
PRECAUTIONS
SEA motors have been created for the automation of gates used by vehicles only. Be aware to avoid the
crossing of the gate path because it is very dangerous for pedestrians (fig. 4).
Install the warning signs, on each side of the gate and in avisible zone
which informs the pedestrians
about the danger they run when passing or resting in the environment of the gate (fig. 5).
Important:
For a higher security, SEA advices to install infrared photocells.
Fig. 4
Fig. 3
Fig. 5
Fig. 1
Fig. 2
GATE WARNINGS AND PRECAUTIONS
International registered trademark n. 2.777.971
Install the operator in the correct position
Do not Install the front bracket in a weak part of the gate
Not for pedestrian opening
