Fig. 23
Fig. 22
A
Fig. 25
BREATHER
SCREW
Half Tank
Mini Tank
VERY IMPORTANT
Take off the breather screw (lower part of the
operator) after installation.
Fig. 24
INSTALLATION OF THE MINI TANK MECHANICAL LIMIT SWITCH STOPS
(Accessories on request)
- Release the unit (as in Fig. 36).
- Let the rod come out about 3/4 of its run.
- Put the limit switch stops on the front flange of the unit with the two rods (of the three which are present on the
stop) which are in parallel to the gate (Fig. 22).
- Fix the stop with the two included screws.
- Put the provided bush
(A)
into the rod.
- At this point hook the rod on the front fixation.
- To adjust the stop in opening act on disc, and in closing on disc 2.
Attention: the mounting of the mechanical stop does not cause the reduction of the stroke.
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
HALF TANK - MINI TANK
English
English
MINI TANK KIT MECHANICAL STOPS
(optional)
MINI TANK KIT MECH./ELECTR. STOPS
(optional)
Rod in parallel to the gate
Disc 2
Disc 1
Connector
Clamp
Disc 2
Disc 1
Unscrew and take off
at the end of the
installation
Down
Up
26
67411170
REV 06 - 03/2015
Summary of Contents for HALF TANK
Page 22: ......
