Fig. 40
Fig. 38
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
To the attention of users and technicians
RISK EXAMINATION
The points indicated by arrows in Fig. 38 are potentially dangerous. The installer must take a thorough risk examination to prevent
crushing, conveying, cutting, grasping, trapping so as to guarantee a safe installation for people, animals and things. As for
misunderstandings that may arise refer to area distributor or call our help desk. These instructions are part of the device and must be
kept in a well known place. The installer shall follow the provided instructions
thoroughly. SEA S.p.A. products must only be used for the automation of doors,
gates and wings. Any initiative taken without SEA S.p.A. explicit authorization will
preserve the manufacture from whatsoever responsibility. The installer shall
provide warning notices on not assessable further risks. SEA S.p.A. in its
relentless aim to improve the production, is allowed to make whatsoever
adjustment without giving notice. This does not oblige SEA S.p.A. to up-grade the
past productions. SEA S.p.A. can not be deemed responsible for any damage or
accident caused by product breaking, being damages or accident due to a failure
to comply with the instructions herein. The guarantee will be void and the
manufacturer responsibility will be nullified if SEA S.p.A. original spare parts are
not being used. The electric installation shall be carried out by a professional
technician who will release documentation as requested by the laws in force.
Packaging materials such as plastic bags, foam polystyrene, nails etc. must be
kept out of children’s reach as dangers may arise.
INITIAL CHECK AND PUTTING IN SERVICE
After having completed all necessary operations, for the correct installation of the products, described in the present manual and after having
valued all resting risks which could arise in whatever installation
is necessary to test the automations to guarantee the max. security
and in
particular way to guarantee the respect of what foreseen by the law and the normatives in force. In particular the test must be executed following
the
EN12445
ruel which establishes
the testing methods for the testing of
the gate operators respecting the
established limits by the
EN 12453
law.
SAFETY GATE
For a correct and safe installation it is
strongly recommended to install the
Safety Gate,
which allows the
fulfilment of the force diagram
included in the
EN 12453
ruel and
the testing of the putting in service
and of the whole installation.
NOTE:
In case of installations as
shown in the figure on the right it is
possible to use the Safety Gate with a
straight rod, solving the dimensions
problem of the arm.
SAFETY PRECAUTIONS
All electrical installation work should conform to current regulations.
A 16A - 0,030A differential switch must be incorporated into the source of the gate main electrical supply and the entire system must be properly
earth bonded. Remember to separate mains (230/120V) carrying cables from low voltage control cables.
INTENDED USE
The Half Tank and Mini Tank in all their versions have been planned to be used exclusively for the automation of swing gates
SPARE PARTS
To obtain spare parts contact:
SEA S.p.A. ZONA Ind.le, 64020 S.ATTO Teramo Italia
SAFETY AND ENVIRONMENTAL COMPATIBILITY
Please dispose of the product and circuit packing materials in a responsible and appropriate way.
When being transported this product must be properly packaged and handled with care.
MAINTENANCE AND DECOMMISSION
The decommission and maintenance of these unities must be carried out by specialised and authorised personnel only.
LIMIT OF GUARANTEE
For the guarantee see the sales conditions on the official SEA price list.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY IMPROPER USE
OF THIS PRODUCT.
SEA
reserves the right to do changes or variations that may be necessary to its products with no obligation to notice.
67411170
31
Fig. 39
HALF TANK - MINI TANK
English
English
REV 06 - 03/2015
Summary of Contents for HALF TANK
Page 22: ......
