background image

65

67411170

Sistemi Elettronici

di Apertura Porte e Cancelli

International registered trademark n. 804888

®

Dichiarazione di conformità

Declaration of Conformity

La SEA S.p.A. dichiara che, con l’installazione degli adeguati dispositivi di sicurezza e di filtraggio 
disturbi, i prodotti:

SEA 

S.p.A.

 declares that by installing the appropriate safety equipment and noise filtering the 

products:

Descrizione / 

Description

Modello / 

Model

Marca / 

Trademark

Half Tank 270 AC (e tutti i suoi derivati/

and all its by-products

)

10401026 SEA

Half Tank 390 AC (e tutti i suoi derivati/

and all its by-products

)

10501036 SEA

Mini Tank 270 AC (e tutti i suoi derivati/

and all its by-products

)

10103505

                       

SEA

sono costruiti per essere incorporati in una macchina o per essere assemblati con altri macchinari per 
costruire una macchina ai sensi della Direttiva 2006/42/CE:

are

 

built to be integrated into a machine or to be assembled with other machinery to create a machine 

under the provisions of Directive 2006/42/CE:

sono conformi ai requisiti essenziali di sicurezza relativi al prodotto entro il campo di applicabilità delle 
Direttive Comunitarie 2006/95/CE e 2004/108/CE.

are conforming to the essential safety requirements related to the product within the field of 
applicability of the Community Directives 2006/95/CE and 2004/108/CE.   

COSTRUTTORE o RAPPRESENTANTE AUTORIZZATO:

MANUFACTURER or AUTHORISED REPRESENTATIVE:

SEA S.p.A.

       DIREZIONE E STABILIMENTO:
       Zona industriale 64020 S.ATTO Teramo - (ITALY)
             Tel. +39 0861 588341 r.a. Fax +39 0861 588344

Http://www.seateam.com

I test sul prodotto sono stati effettuati in configurazione standard e in riferimento alle norme specifiche 
per la sua classe d'utilizzo.

The products have been tested   in standard configuration and with reference to the special norms 
concerning the classe of use.

               (Luogo, data di emissione) 

                                                   

     

      

(Place, date of issue)

                                                 

       Teramo, 23/11/2012

                                      

            

 

         

REV 06 - 03/2015

Summary of Contents for HALF TANK

























Reviews: