Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
To the attention of users and technicians
RELEASE SYSTEM
To release operate as follows:
-Insert the key and turn it about 180° anti-clockwise (Fig.36 - Fig.37).
To relock the operator do as follows:
-Insert the key and turn it clockwise until it stops (Fig.36 - Fig.37).
Attention:
To release cut current supply
All the above mentioned operations must be executed by an authorised installer only.
1) Check the robustness and the stability of the gate; particularly the leaning and/or rotation
points of the gate ( hinges).
2)
Check the oil level in the hydraulic/in oil bath operators (cap on the back cover of the operator)
3) Replace the hydraulic oil with the oil recommended by the producer
4) Check the function of the release
5) Check the function of the by-pass valves
6) Check and grease the fixation pivots
7) Check the integrity of the connecting cables
8) Check the function and the conditions of the limit switch stops in opening and closing (where the
mechanical stop accessory is present)
9) Check the good status of all the apparatus which are subject to efforts (back fixation, oscillating
fork,and front fixation)
10) Check the functionality of all the accessories especially the function of all security devices and
of the Safety Gate.
11)
Lubricate the rod (see page 19) with SEA grease (GREASE GL 00 Cod.65000009)
PERIODICAL MAINTENANCE
Annual
Annual
4 Years
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
12)
After having executed the periodical maintenance it is neccessary to repeat the test
and to reactivate the automation.
67411170
30
HALF TANK - MINI TANK
English
English
Fig. 36
Lock
Release
Fig. 37
HALF TANK
MINI TANK
Lock
Release
REV 06 - 03/2015
Summary of Contents for HALF TANK
Page 22: ......
