Fig. 30
Fig. 31
Fig. 32
Fig. 34
Fig. 33
EXTERNAL RELEASE MOUNTING (accessory on request)
ATTENTION:
The mounting of the
external release must be executed as shown in the figures
33 and 34. For more
details refer to the mounting instructions in the external release mounting Kit.
PLASTIC RELEASE MOUNTING
ATTENTION:
the mounting of the plastic release must
be effectuated as shown in fig. 30
only and
exsclusively after havingfinished all the instalaltion
operations, mounting of the rod cover and
calibration of the by-pass valves.
by-pass cover
by-pass cover
ALUMINIUM RELEASE WITH KEY MOUNTING (accessory on request)
ATTENTION:
The mounting of the aluminium release must be executed as shown in
figure 31 only and exclusively
after having finished all installation operations, the rod cover mounting and the calibration of the by pass valves.
The release key is kept in the inside of the aluminium release cover (see fig. 32).
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
67411170
28
HALF TANK - MINI TANK
English
English
REV 06 - 03/2015
Summary of Contents for HALF TANK
Page 22: ......
