67410182
Advises
Make sure all Safeties are turned ON
Problem Found
Possibile Cause
Solutions
Motor doesn’t respond to any
START impulse
Gate doesn’t move while the
motor is running
Gate doesn’t reach the complete
Open / Closed position
The gate opens but doesn’t
close
The gate doesn’t close
automatically
a.)
The motor is in the released position
b.)
There is an obstacle
a.)
Pause time set to high
b.)
Control unit in semi
-
autom. logic
a.)
Wrong setting of the limit switches
b.)
Error on programming
c.)
Gate is stopped by an obstacle
d.)
Torque too low
a.)
Re-lock the motor
b.)
Remove obstacle
a.)
Adjust pause time
a.)
Set limit switches
b.)
Repeat programming
c.)
Remove obstacle
d.)
Increase torque parameter
b.)
Set the pause parameter on a different value
from the
off
TROUBLE SHOOTING
Page for both instaler and user
WAREHOUSING TEMPERATURES
T
min
T
Max
Dampness
min
Dampness
Max
5%
Not condensing
90%
Not condensing
MAINTENANCE
Considering the number of working cycles and the kind of gate, if the gate has changed the clutches and doesn’t work it’s necessary to
periodically proceed, with
the learning times reprogramming on the electronic control unit.
Periodically clean the optical systems of the photocells.
REPLACEMENTS
Any request for spare parts must be sent to:
SEA S.p.A. - Zona Ind.le, 64020 S.ATTO - Teramo - Italia
SAFETY AND ENVIRONMENTAL COMPATIBILITY
Disposal of the packaging materials of products and/or circuits should take place in an approved disposal facility.
REGULAR PRODUCT DISPOSAL (electric and electronic waste)
(It’s applicable in EU countries and in those ones provided with a differential waste collection)
The brand that you find on the product or on documentation signals that the product must not be disposed off together with other domestic
waste at the end of life cycle. In order to avoid any possible environmental or health damage caused by irregular waste disposal, we
recommand to separate this product from other forms of waste and to recycle it in a responsible way in order to provide the sustainable re-use of
material resources. Domestic users are invited to contact the retailer where the product has been purchased or the local office in charge of all
the information related to differential watse collection and recycling of this kind of product.
STORING
Materials handling must be made with appropriate vehicles..
WARRANTY LIMITS
SEA reserves the right to make any required modification or change to the products and/or to this manual without any advanced notice
obligation.
For the guarantee see the sales conditions on the official SEA price list.
- 20°C
+ 65°C
English
GATE 1 DG R1
a.)
Check the connected N.C. contacts
b.)
Burnt fuse
a.)
Check the connections or the jumpers
on the connections of the safety edge or
of the stop and of the photocell if connected
b.)
Replace the burned fuse on the
control unit
a.)
.)
Ammeter alarm
The contacts of the photocells are
connected and open
b.)
The stop contact is connected and open
c.)
The edge contact is open
d
a.) b.) c.)
Check the jumpers or the
connected devices and the signals
indicated on the warning lamp
d.)
Check if the ammeter alarm has
intervened and eventually increase the
torque parameter.
41
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Rev.06 - 09/2014