SEA GATE 1 DG R1, Manual

Page: 8 / 28

67410182
PRESS AT THE SAME TIME FOR 5 SECONDS TO ENTER OR TO EXIT THE SPECIAL MENU
MENU SP Default SET
10 100
10 100
0.0 5.0
Pre-flashing only
active before closing
75
Off
75
3 - Pvshouer
Off
Only (los ng
Off
4 - pvsk ng stroke
Off 3
Off 50 20
Off 50 20
bvzzer
Buzzer
9 - reuerse otor
U
Off
On
Off
Off
UP DOWN
SPECIAL MENU FUNCTIONS TABLE GATE 1 DG R1
UP and DOWN
press END or
UP and DOWN
For entering into the special menu move on one of the menu and press the
buttons at the same time for 5 s. For exiting the special menu move on one of the
menu and press the buttons at the same time for 5 s.
Description
Set value
1 - open ng torq 1
*
2 - (los ng torq 1
*
Opening torque
Note: with hydraulic motors
the torque will be on 100%
Closing torque
Note: with hydraulic motors
the torque will be on 100%
Open ng and (los ng
Only open ng
Disabled
Opening an closing
Opening only
Closing only
From OFF to 3 seconds
6 - (los ng sloudoun
5 - open ng sloudoun
From OFF to 50% of
the stroke
From OFF to 50% of
the stroke
7 - preflasx ng
8 - flasx ng l gxt
Only (los ng
Nor al
U
L gxt
aluays
Normal
Control lamp
Always ON
Pre-flashing time
Synchronized right motor
Synchronized left motor
Nor al
U
20
13 - (ourtesy l gxt
N (y(le
Courtesy light setting
from 1s to 4min.
Courtesy light in cycle
English
GATE 1 DG R1
SPECIAL MENU
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
Indicates the working times selflearning
in opening and closing.
With UP or DOWN it is possible to increase
or reduce the working times.
OFF
ON
Off
Off
10 - EN(ODER
*
xxx.s
Xxx.
xxx.s
Xxx.
11 - opening ti e
u
12 - (losing ti e
u
10 - EN(ODER
*
11 - en(oder tot.
12 - en(oder par.
In ON enables the
Encoder, in OFF
it's disabled
In ON enables the
Encoder, in OFF
it's disabled
Encoder impulses stored in programming
Encoder impulses during operation
1 240
Off on
Off
14 - traff ( l gxt
reseruat on
When setting this function
the pedestrian input will be
activated to work on the
auxiliary board SEM
(traffic light management).
Note : If the encoder is off, the menus 11and 12 will indicate the "Opening time" and the "Closing Time".
28
Rev.06 - 09/2014