Sea Tel ST14, Installation And Maintenance Manual

Page: 48 / 84

Setup for Model ST14E ST14 Ku-Band TVRO
4-6
AUTO* Automatically scans through all the available forced
*
(star’ed) FEC
rates. If the satellite does not generate an NID but does have a
unique combination of FREQ, BAUD and FEC lock, select the
appropriate FEC* choice from this list. The system will then
generate its own unique forced NID to represent the desired
satellite. You will need to enter this pseudo NID in the NID setting
below.
1/2*
2/3*
3/4*
5/6*
6/7*
7/8*
3. When the desired choice is displayed, press the
SAVE
key to save the parameters for this
SAT. This saves the FEC rate to use for this SAT.
4. If you want to edit any of the
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
5. If you do not want to edit any other sub-menu parameters, press SAVE again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
4.3.3.12. Lo Band NID
Enter or edit the
Lo Band Network ID
4 digit HEX value for the receiver used to Identify & track
this satellite.
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the rightmost digit. Press
▼
&
▲
arrow keys to
increment/decrement this digit (only valid HEX values 0-F will be displayed).
3. Press the NEXT key to move the cursor to the digit to the left. Press
▼
&
▲
arrow keys to
increment/decrement this digit.
4. Continue editing until all 4 digits have been set to the desired NID for this satellite
selection. Press the
SAVE key to save the NID parameter for this SAT.
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
4.3.3.13. Hi Band NID
Enter or edit the Hi Band Network ID 4 digit HEX value for the receiver used to Identify & track
this satellite.
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the rightmost digit. Press
▼
&
▲
arrow keys to
increment/decrement this digit (only valid HEX values 0-F will be displayed).
3. Press the NEXT key to move the cursor to the digit to the left. Press ▼ & ▲ arrow keys to
increment/decrement this digit.
4. Continue editing until all 4 digits have been set to the desired NID for this satellite
selection. Press the
SAVE key to save the NID parameter for this SAT.
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press SAVE again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.