Sea Tel ST14, Installation And Maintenance Manual, Page: 36 / 84

Setup for Model ST14M ST14 Ku-Band TVRO
3-4
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
3.3.4.4. RHCP (MHz) freq
Enter or edit the Right Hand Circular Frequency (in MHz) for the receiver to use for tracking this
satellite. Range of acceptable frequency input is 950-2150 MHz
1. Press the
NEXT
key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the rightmost digit. Press
▼
&
▲
arrow keys to
increment/decrement this digit.
3. Press the
NEXT
key to move the cursor to the digit to the left. Press
▼
&
▲
arrow keys to
increment/decrement this digit.
4. Continue editing until all 4 digits have been set to the desired tracking Frequency for this
satellite selection. Press the
SAVE
key to save the FREQ parameter for this SAT.
5. If you want to edit any of the other
default
values that are loaded with preset, press the
▼ arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow
key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
3.3.4.5. BAUD
Enter or edit the best
Baud rate
for the receiver to use for this satellite. Range of acceptable input
is 5000-30000 symbols per second.
1. Press the NEXT key to select this sub-menu parameter for adjustment.
2. A cursor will appear under the rightmost digit. Press
▼
&
▲
arrow keys to
increment/decrement this digit.
3. Press the
NEXT
key to move the cursor to the digit to the left. Press
▼
&
▲
arrow keys to
increment/decrement this digit.
4. Continue editing until all 5 digits have been set to the desired Baud rate for this satellite
selection. Press the
SAVE
key to save the BAUD parameter for this SAT.
5. If you want to edit any of the other default values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
6. If you do not want to edit any other sub-menu parameters, press
SAVE
again to exit the
sub-menu and return to the SAT main menu display. From there you can press the
▼
arrow key to go to next SAT numeric menu choice or to the Factory Settings menu choice.
3.3.4.6. FEC
Enter or edit the best
Forward Error Correction rate
for the receiver to use for this satellite.
This choice presets all of the other sub-menu parameters to factory defaults for the satellite you
choose to set this SAT to.
1. Press the
NEXT
key to select this parameter for adjustment.
2. Once selected, press
▼
&
▲
arrow keys to scroll through a list of choices which this SAT
can be preset to. This list may change in future software revisions. The current choices
are:
AUTO Automatically scans through all the standard DVB & DSS FEC rates.
1/2
2/3
3/4
5/6
6/7