Sea Tel ST14, Installation And Maintenance Manual

Page: 22 / 84

Setup for Model ST14 D ST14 Ku-Band TVRO
2-2
DishPro or DishPro Plus Satellite Receiver to determine and target the correct satellite based on the operators
channel selection. For integrated Receivers that do support DiSEqC, the ST-14 requires that the user press
the
NEXT key to determine and target the desired satellite. The Targeting Mode Parameter selection allows
the user to configure the systems mode of satellite targeting selection. The user will be presented with the
option of manual satellite targeting (legacy mode) or one of 4 auto satellite targeting modes.
1. Press the NEXT key to SELECT this parameter for adjustment.
2. Once selected, press
▼
&
▲
arrow keys to scroll through a list of choices. The current mode
choices and their descriptions are as follows:
•
MANUAL TARGET :
Single Satellite tracking requirement
Intended Use:
Description
By selecting this mode of manual operation the antenna will not automatically
target any satellite preset regardless of any received commands by the satellite
receiver to do so. In this mode the user is required to manually target the desired
satellite by pressing the
NEXT
key to select the appropriate Preset (i.e. SAT 2) and
allowing the satellite receiver to select receive polarity based on the current
channel selection.
:
•
EchoStar: 2 SAT
:
Two EchoStar Satellite tracking requirement
Intended Use:
Description
By selecting this mode of automatic operation the antenna will automatically select the
correct receive polarity and satellite switching between SAT 1 and SAT 2 as commanded
by an EchoStar compatible DishPro or DishPro Plus receiver using DiSEqC protocol.
:
•
EchoStar: 3 SAT
:
Three EchoStar Satellite tracking requirement
Intended Use:
By selecting this mode of automatic operation the antenna will automatically select the
correct receive polarity and satellite switching between SAT 1, SAT 2, and SAT 3 as
commanded by an EchoStar compatible DishPro or DishPro Plus receiver using DiSEqC
protocol.
Description:
•
EchoStar: 4 SAT :
Four EchoStar Satellite tracking requirement
Intended Use:
By selecting this mode of automatic operation the antenna will automatically select the
correct receive Automatic polarity and satellite switching between SAT 1, SAT 2, SAT 3,
and SAT4 as commanded by an EchoStar compatible DishPro or DishPro Plus receiver using
DiSEqC protocol.
Description:
In North America, both Dish Network and Bell TV use EchoStar
Satellites and EchoStar (DishPro and DishPro Plus) receivers and equipment. The
DishPro system uses DiSEqC commands to select desired satellite(s) and receive
polarity.