Sea Recovery SRC Aqua Matic 1400-2, Owner'S Manual, Page: 15 / 223

• System and accessories: One (1) year
• Repairs made by Sea Recovery Corporation after the original warranty period has expired: Three (3) months
• Normal, reoccurring user maintenance on the following is not covered by this or any Sea Recovery Corporation
limited warranty: Sea Strainer Element, fuses, instrument calibration, cartridge filter elements and/or the centrifugal
pump seal assemblies
The implied warranties, which the law imposes on the sale of this product, are expressly LIMITED in duration to
the time period above. Sea Recovery Corporation shall not be liable for damages, consequential or otherwise,
resulting from the installation, use, and/or operation of this product or from the breach of this LIMITED WARRANTY.
Attention: The Sea Recovery Corporation limited warranty does not cover third-party installation components.
Improper installation resulting in System or component failure/performance decline is not covered by this or
any Sea Recovery Corporation limited warranty. The limited warranty does not extend to any system or
system component which has been subjected to alteration, misuse, neglect, accident, improper installation,
inadequate or improper repair or maintenance or subject to use in violation of instructions furnished by Sea
Recovery Corporation, nor does the warranty extend to components on which the serial number has been
removed, defaced, or changed.
Cleaning
The is guaranteed to be cleanable for a minimum of one (1) year from date of shipment, providing cleaning periods
are adhered to, and fouling is acid soluble metal hydroxides and calcium carbonates or alkaline soluble organic,
inorganic substances and microbiological slimes. The Sea Recovery RO Membrane Element is not guaranteed
against iron fouling (rust), chemical or petroleum products attack, extreme temperatures [over 120°F (49°C) under
32° F (0° C)], drying out, or extreme pressures [over 1000 psig (69 bar)]. In the event of a defect, a malfunction,
or failure specifically covered by this warranty and during the warranty period, Sea Recovery Corporation will repair
or replace, at its option, the product or component therein which upon examination by Sea Recovery Corporation
appears to be defective.
Product Changes
Sea Recovery Corporation reserves the right to make changes or improvements in its product, during subsequent
production, without incurring the obligation to incorporate such changes or improvements on previously manufactured
equipment.
Obtaining Warranty Service
To obtain warranty service, the defective product or part must be returned to an authorized Sea Recovery Corporation
Service Center or direct to Sea Recovery Corporation. An updated listing of Sea Recovery Corporation Factory
Service Centers can be found on the Sea Recovery Corporation web site at
http://www.searecovery.com . The
purchaser must pay any transportation or labor expenses incurred in removing and returning the product to the
service center or to Sea Recovery Corporation.
Registration
Sea Recovery Corporation recommends that all customers register their System immediately after delivery to
ensure and guarantee product technical support and warranty.
Temperature and Pressure Effects
Note: Do not use this chart for brackish water systems and applications
As the sea water temperature gets higher, the pressure must be adjusted so that the System does not exceed
100% of its rated product water flow. Product water flow that is greater than 100% of rated capacity causes
premature fouling of the RO Membrane Element, which voids the RO Membrane Element warranty. The System
will also require more frequent cleaning. Please refer to the chart below for pressure adjustments.
13
Introduction