Sea Recovery SRC Aqua Matic 1400-2, Owner'S Manual, Page: 131 / 223

129
System Warning Messages
The Aquamatic, Aquamatic XL and AquaWhisper DX control system contains a system warning message
center. These types of faults are meant to bring attention to the user that the system is not running
normally. These faults are ok for a short term, but may lead to a larger problem if not corrected. When a
system performance related issue is detected the system alarm output will sound and a warning will be
logged in the warning massage center.
1. To stop the alarm press, Accept.
System warning notifications and likely causes
Number Message Displayed Possible Causes
49
Booster pump outlet sensor has
been set to by-pass by system
user.
The operator has entered the emergency override
screen and activated the emergency by-pass of the
booster pump outlet pressure sensor. The system can
only operate in this state for a limited time. Consult
Parker for additional information
50
HP pump inlet sensor has been set
to by-pass by system user.
The operator has entered the emergency override
screen and activated the emergency by-pass of the
high-pressure pump inlet pressure sensor. The system
can only operate in this state for a limited time. Consult
Parker for additional information
51
HP pump outlet sensor has been
set to by-pass by system user.
Manual operation only.
The operator has entered the emergency override
screen and activated the emergency by-pass of the
high-pressure pump outlet pressure sensor. The system
can only operate in this state for a limited time. Consult
Parker for additional information.
Detected system
warning description
Exit message
center by pressing
here