manualshive.com logo in svg

Sea-doo GTX DI 5649, Operator'S Manual

Share
Download
Sea-doo GTX DI 5649 Operator'S Manual Download Page 15

13

BOMBARDIER INTERNATIONAL LIMITED 
WARRANTY: 2000 SEA-DOO

®

 WATERCRAFT

1. WARRANTY COVERAGE PERIOD

BOMBARDIER INC. ("Bombardier"), as manufacturer, warrants FROM THE DATE OF DE-
LIVERY TO THE FIRST CONSUMER that each 2000 SEA-DOO Watercraft sold anywhere
in the world except the United States and Canada, as NEW and UNUSED and PREDELIV-
ERED by an authorized SEA-DOO watercraft dealer, duly appointed by an authorized
SEA-DOO International Distributor, will be free from any defects in material and/or work-
manship for a PERIOD of:

a) For private owners:

• TWELVE (12) CONSECUTIVE MONTHS.

SEA-DOO RX-DI AND SEA-DOO GTX-DI MODELS
• TWELVE (12) CONSECUTIVE MONTHS for the emission related components pro-

viding input to emission control. (e.g. sensors)

b) For commercial use:

• FOUR (4) CONSECUTIVE MONTHS.

SEA-DOO RX-DI AND SEA-DOO GTX-DI MODELS
• TWELVE (12) CONSECUTIVE MONTHS for the emission related components pro-

viding input to emission control. (e.g. sensors)

All genuine Bombardier accessories, installed by an authorized SEA-DOO watercraft dealer
at the time of delivery of the new and unused SEA-DOO watercraft, carry the same War-
ranty Coverage Period as for the SEA-DOO wartercraft.

2. WHAT BOMBARDIER WILL DO

BOMBARDIER through the local authorized SEA-DOO International Distributor will, during
the Warranty Coverage Period, repair or replace, at its option, all genuine BOMBARDIER
part found defective in material and/ or workmanship, under normal use, maintenance and
service, with a genuine BOMBARDIER part without charge for parts and labor, at any local
authorized SEA-DOO watercraft dealer.

3. CONDITION TO HAVE WARRANTY WORK VALIDATED

The customer must notify a local authorized SEA-DOO watercrafts dealer within two (2)
days of the appearance of the defect in material and/or workmanship and present to the
servicing authorized SEA-DOO watercraft dealer the SEA-DOO Warranty Registration Card
or a proof of purchase of the NEW and UNUSED 2000 SEA-DOO watercraft and must sign
the repair/work order prior to the start of the repair in order to validate a warranty repair.
All parts replaced under this limited warranty become the property of BOMBARDIER.

4. EXCLUSIONS - ARE NOT WARRANTED

• Normal wear and tear items;
• Labor, parts and lubricant costs of all maintenance services;
• Damages caused by failure to provide proper maintenance and/or storage, as described

in the 

"2000 SEA-DOO Watercraft Operator's Guide" ;

• Damages resulting from improper repairs, modifications or use of non-approved parts

or, repairs not performed  by a authorized SEA-DOO watercraft dealer;

• Damages resulting from abuse, misuse, neglect, racing;
• Damages resulting from accident, fire, theft, vandalism or any act of God;
• Incidental or consequential damages, or damages of any kind such as but not limited

to towing charges, telephone calls or taxi;

• Water damages caused by water ingestion;
• Damages related to gel coat finish including but not limited to cosmetic gel coat finish,

blisters or fiberglass delamination caused by blisters, crazing, spyder or hairline cracks; and

• Damages resulting from improper service or maintenance.

smo2000-003a.book Page 13 Thursday, November 11, 1999 10:44 AM

www.SeaDooManuals.net

Summary of Contents for GTX DI 5649




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands