
67
CAUTION:
Antifreeze mix must be
fed in cooling system. Otherwise re-
maining water will freeze. This oper-
ation requires a good technical
knowledge of the cooling system
path. If antifreezing is not performed
adequately engine/exhaust system
may freeze and cause severe engine
damage. We strongly recommend
this operation be performed by an
authorized SEA-DOO dealer.
CAUTION:
Always use ethylene gly-
col antifreeze containing corrosion
inhibitors specifically recommended
for aluminum engines.
NOTE:
When available, it is recom-
mended to use biodegradable anti-
freeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
NOTE:
The engine will not have to run
during this operation but should have
been ran before, to exhaust as much
water as possible, from cooling sys-
tem components.
NOTE:
On
some models
, it may be
easier to reach hoses when you re-
move the seat opening bridge.
1. Seat opening bridge
Hose Pinchers Installation
Some hoses have to be plugged to
prevent draining, before filling cooling
system jackets with the antifreeze.
Install hose pinchers at the following
location:
TYPICAL
1. Water outlet hose
1. Crankcase cooling cover outlet hose
1. Engine cylinder drain hose
F15L03Y
1
F07E0NZ
1
F12E0AY
1
F07E0JY
1
smo2003-005a.book Page 67 Friday, November 1, 2002 8:25 AM
Summary of Contents for 2003 LRV DI
Page 1: ......
Page 82: ...smo2003 005a book Page 80 Friday November 1 2002 8 25 AM ...
Page 88: ......