P:\INSTALLATION INST\Access Control\INST-936.vsd 0106 Page 13
USING KEYPAD LOGGER SOFTWARE
Running this log will record all actions of the 936 EntryCheck
™
. You can also print up to the
last 500 transactions. The date and times are taken from the computer, not the 936
EntryCheck
™
.
1. Double-Click on the “SDC EZKeys Log” icon.
2. Click “Set Up” and select appropriate options and COM Port.
3. Click “OK.”
4. Click on the GREEN square icon to start logging. To stop logging events and place the
program in “idle” mode, click on the RED square icon.
To clear the log
, stop the event logger. Select the OPERATION menu, and CLEAR LOG.
Set up
If BIND is blank, the log will only list the User Number along with the action. If you BIND to an
existing Keypad Program File (see previous section), the user name will also be listed.
Select “Options” and “COM Port.”
Alarms
Loss of power- reported when power is restored.
Tamper Alarm- 4 incorrect code entries
Loss of communication between Keypad and Control Module (Keypad removed or broken
connection).
NOTE:
You cannot use the Keypad Programmer while the Keypad Logger is running.