17
How to use STANDARD Ezi Tube+
*Only for lipid testing
1.
Touch the tip of a STANDARD Ezi Tube+ to the edge of the blood
drop. Blood will automatically be drawn up the tube by capillary
action. Keep the tube in contact with the blood until it is fi lled to
the black line. You should squeeze your fi nger if you need more
blood.
2.
Transfer the collected sample to the sample well on the test strip
by gently squeezing the bulb of the STANDARD Ezi Tube+.
3.
Close the fl ap to start the test.
•
Used STANDARD Ezi Tube+ can cause infection. Please discard the used STANDARD Ezi Tube+ according to local regulations.
•
Collect the blood sample carefully to try and avoid air bubbles.
How to use the micropipette
*Only for lipid testing
1
2
1
2
3
2
3
4
1
2
3
2
3
4
2
3
4
3
Place the tip securely on the micropipette.
Push the plunger down and hold it in this position.
Touch the tip to the blood drop.
4
5
6
Slowly release the pluger and check the blood
is drawn into the tip.
Open the fl ap and apply the blood sample.
Remove the tip from the micropipette and dispose
of the tip in a biohazardous waste container.
