manualshive.com logo in svg

Scientek SW6000 Series, Operating And Maintenance Manual, Page: 60 / 103

Share
Download
Scientek SW6000 Series Operating And Maintenance Manual Download Page 60

Operating and Maintenance Manual 
Scientek Washer Model SW-6000 

 

Revision-3, Sept. 2007 

 

7-3

7.4 CYCLE COMPLETE CHECK 

CLE COMPLETE 

display and indicator light is illuminated. 

2.

 

Inspect all piping, valves, flanges and gaskets for leaks. 

3.

 

Press th

. 

 

Press the START button and ensure that the 
pressed. 

.

 

Turn the POWER switch to the OFF position. 

2.

 

Close all of the utility supply lines. 

3.

 

Position

4.

 

Replace

5.

 

Inspe  

6.

 

Clean unit as describe in 

Section 10.1.2.1.

 

1.

 

Verify that the 

CY

e STOP button and verify that the 

STOP

 indicator display and light is illuminated

unit will not operate with the STOP button 

4.

7.5 CLEANUP 

1

 building electrical supply disconnect switch (circuit breaker) in the OFF position. 

 any access panels that were removed. 

work area to be sure all materials used during testing have been removed. 

ct

Scientek Technology Corporation 

 

Tel:  (604) 940-8084 

7943A Progress Way, Delta, BC V4G 1A3 

 

Fax:  (604) 940-8085 

Summary of Contents for SW6000 Series








































































































Reviews:

No comments