manualshive.com logo in svg

Scientek SW6000 Series, Operating And Maintenance Manual, Page: 31 / 103

Share
Download
Scientek SW6000 Series Operating And Maintenance Manual Download Page 31

Operating and Maintenance Manual 
Scientek Washer Model SW-6000 

 

Revision-3, Sept. 2007 

 

5-6

This is a sample of a sequence of information for the Prewash 
step: 

 
 
 
 
 
 

 
 
 
 

Operation Messages: 
 
The message window is provided to display the information regarding the washer’s operation, 
the operation conditions of the control devices and the actions required by the operator. 

 

 

Washer is ready for operation, the operator is prompted to select 
a cycle and press the start button to initiate washing.

 

 
 
 

Washer is in operation. 

 
 
 

The emergency stop button is pressed. 

 
 
 

The temperature guarantee had not been achieved. Operator 
should press the start button to re-process the load. 

 

 

Scientek Technology Corporation 

 

Tel:  (604) 940-8084 

7943A Progress Way, Delta, BC V4G 1A3 

 

Fax:  (604) 940-8085 

Summary of Contents for SW6000 Series








































































































Reviews:

No comments